ShieldPrime CV was developed to remove all requirements for solvent etching. BeltShield has been used on conveyor belts for FMG, Rio Tinto and BHP.

ShieldSeal 743 is a spray-applied treatment that is specifically engineered to penetrate the capillaries and pores of reinforced concrete structures to prevent electrolyte ingress into the concrete and to stabilise pH to help protect embedded reinforcing steel.

ShieldSeal 743 is a one-time application that increases durability and provides permanent protection, reducing recurring maintenance saving time and money

ShieldFoam PLF (Pole Lock Foam) is a closed cell polyurethane foam designed as a structural foundation replacement for concrete backfill of poles and posts. It can be used to set new poles in the ground, or to straighten existing poles. It is a cost effective, durable alternative to concrete backfill that still allows easy access for inspections of the pole in the below-ground section and requires only 15 minutes to set before conductor stringing.

ShieldChlor-Rid is a one-step application process which decontaminates surfaces at the molecular level, eliminating visually undetectable levels of highly corrosive substances, providing a uniform receptive surface prior to coatings application. The result is that protective coatings are more durable, more corrosion resistant and, therefore, substantially less likely to require frequent maintenance cycles, in other words;
assets last longer and cost less to maintain.

ShieldChlor-Rid is simple, safe, and straightforward.

ShieldProof is added with anti-slip material, low viscosity, solvent free, two component polyacrylate dispersion resin, hardener a crosslinking agent. ShieldProof Anti-Slip can be operated after mixing 4:1 ratio, it is two component mixed paint, can adjust viscosity with water according to actual construction by painted or sprayed.

ShieldMining™ TSL is a unique new generation Thin Skin Lining (TSL) designed specifically for the consolidation of stressed rock structures associated with mining to prevent unravelling of strata and the associated risks presented from falling ground. It also has potential for use as a fire-retardant coating for various substrates. It is a two component hard, tough, resilient material that is applied through low pressure plural component machinery with a static mixer. No heat is required. The product is flexible with good elongation and high early compressive and tensile strengths. Adhesion is outstanding to even moist surfaces. 60 to 70% of the physical properties are achieved in 1-2 hours (depending on ambient temperature) although set up time is only 10-15 minutes

ShieldFix BF filler is a two component non shrinking solvent free epoxy filler. It is high strength, providing the abrasion resistance and compressive strength higher than concrete.

• 100% solids content
• High thickness
• Excellent barrier properties
• Good abrasion resistance
• Light weight
• Excellent adhesion to steel & concrete
• Non shrink

ShieldTop ST170 is a high solids epoxy coating. Its main properties are:

• High performance self-priming universal epoxy
• Excellent adhesion to steel, concrete, aluminium, galvanizing, and ceramic
• On rusted areas, can be applied over mechanically cleaned steel
• Compatible and with excellent adhesion to a wide range of paints
• Can be applied over mechanically cleaned steel and suitable prepared concrete
• Tolerant to slightly damp surfaces
• If required ShieldTop ST170 can be overcoated with a wide range of topcoats
• Applicable on surfaces treated with Water Jetting (Water jet to high pressure) according to Norm NACE nº7/SSPC-VIS-4(I) Excellent application characteristics
• Colors available on ICS tintometric system (Industrial Coatings Solutions)

Artilin 3A Mate is an insecticide and acaricide waterborne matt paint, for interior walls and ceilings. This paint kills mosquitoes, flies, and mites by contact for more than 5 years. The paint film prevents cobwebs setting. It therefore contributes to improve hygiene and to limit the presence of allergic factors. The film of these paints provides protection against the development of mould.

Main Features:
• Last generation pyrethroid water based matt paint which kills mosquitoes, flies, cockroaches, and dust mites by simple contact for at least 5 years.
• Ready to apply.
• Organophosphates free.
• No emissions.
• No harmful effects for humans and pets.
• Best solution for health protection and well being.
• The development of Artilin 3A Mate took many years to accomplish. A wide range of industry experts were
• consulted and involved in the creation this top-of-the-line insecticide paint.
• The attestation of insecticide effect, fungi resistance and interior air quality maintenance, were done by the following entities:
• The attestation of no harmful effects for warm blooded animals were made by the labs Phycher | Bio Développement by the following tests: